A clearcoat paint finish coats aluminum wheels and wheel covers. In
order to maintain their condition:
•
Clean weekly with Motorcraft Wheel and Tire Cleaner. Use a sponge to
remove heavy deposits of dirt and brake dust accumulation. Rinse
thoroughly with a strong stream of water when you have completed
the cleaning process.
•
To remove tar and grease, use Motorcraft Bug and Tar Remover.
•
Never apply any cleaning chemical to hot or warm wheel rims or
covers.
•
Some automatic car washes may cause damage to the finish on your
wheel rims or covers.
•
Industrial-strength (heavy-duty) cleaners, or cleaning chemicals, in
combination with brush agitation to remove brake dust and dirt, could
wear away the clearcoat finish over time.
•
Do not use hydrofluoric acid-based or high caustic-based wheel
cleaners, steel wool, fuels or strong household detergent.
•
If you intend on parking your vehicle for an extended period after
cleaning the wheels with a wheel cleaner, drive your vehicle for a few
minutes before doing so. This reduces the risk of increased corrosion
of the brake discs.
VEHICLE STORAGE
If you plan to store your vehicle for an extended period (30 days or
more), read the following maintenance recommendations to make sure
your vehicle stays in good operating condition.
All motor vehicles and their components were engineered and tested for
reliable, regular driving. Long-term storage under various conditions may
lead to component degradation or failure unless you take specific
precautions to preserve the components.
General
•
Store all vehicles in a dry, ventilated place.
•
Protect from sunlight, if possible.
•
If vehicles are stored outside, they require regular maintenance to
protect against rust and damage.
240
Vehicle Care
2015 F-650/750
(f67)
Owners Guide gf
(ownloose)
, 1st Printing, December 2013
Canadian_French
(fr_can)