Programming/Changing Configurable Settings
Use the information display to access your configurable MyKey settings:
1. Switch the ignition on using an admin key. If your vehicle has
push-button start, place the intelligent access key fob into the backup
slot. The location of your backup slot is in another chapter. See
Starting
and Stopping the Engine
.
2. Access the main menu and select
Settings
, then
MyKey
by pressing
OK
or the
>
button.
3. Use the arrow buttons to get to a configurable feature.
4. Press
OK
or
>
to make a selection.
Note:
You can clear or change your MyKey settings at any time during
the same key cycle as you created the MyKey. Once you have switched
the engine off, however, you will need an admin key to change or clear
your MyKey settings.
CLEARING ALL MYKEYS
You can clear all MyKeys within the same key cycle as you created the
MyKey. If you switch your ignition off, however, you will need to use an
admin key to clear your MyKeys.
Note:
When you clear your MyKeys, you remove all restrictions and
return all MyKeys to their original admin key status at once.
To clear all MyKeys of all MyKey settings, use the information display to
do the following:
1. Access the main menu and select
Settings
, then
MyKey
.
2. Scroll to
Clear All
and press the
OK
button.
3. Hold the
OK
button until
ALL MYKEYS CLEARED
displays .
CHECKING MYKEY SYSTEM STATUS
You can find information about your programmed MyKeys by using the
information display.
MYKEY DISTANCE
Tracks the distance when drivers use a MyKey. The only way to delete
the accumulated distance is by using an admin key to clear your MyKey.
If the distance does not accumulate as expected, then the intended user
is not using the MyKey, or an admin key user recently cleared and then
recreated a MyKey.
MyKey
65
2014 Taurus
Owners Guide gf, 2nd Printing, September 2013
USA
(fus)
