•
During the countdown before engine shutdown, you are prompted to
press
OK
or
RESET
(depending on your type of information display)
to temporarily switch the feature off (for the current ignition cycle
only).
Stopping the Engine When Your Vehicle is Stationary
1. Move the transmission selector lever to position
P.
2. If your vehicle has an ignition key, turn the key to the off position.
If your vehicle has a keyless start system, press the button once.
3. Apply the parking brake.
Note:
This switches off the ignition, all electrical circuits, warning lamps
and indicators.
Note:
If the engine is idling for 30 minutes, the ignition and engine
automatically shut down.
Stopping the Engine When Your Vehicle is Moving
WARNING:
Switching off the engine when the vehicle is still
moving will result in a loss of brake and steering assistance.
The steering will not lock, but higher effort will be required. When the
ignition is switched off, some electrical circuits, warning lamps and
indicators may also be off.
1.
If your vehicle has an ignition key,
move the transmission
selector lever to position
N
and use the brakes to bring your vehicle
to a safe stop. When your vehicle has stopped, move the transmission
selector lever to position
P
and turn the key to the off position.
2.
If your vehicle has a keyless start system,
press and hold the
button for one second, or press it three times within two seconds.
Move the transmission selector lever to position
N
and use the brakes
to bring your vehicle to a safe stop. When your vehicle has stopped,
move the transmission selector lever to position
P
and switch the
ignition off.
3. Apply the parking brake.
Your vehicle may have remote start capability. Refer to
Remote start
in
the
Keys and Remote Control
chapter.
Starting and Stopping the Engine
169
2014 Taurus
Owners Guide gf, 2nd Printing, September 2013
USA
(fus)