background image

Introduction

Features

PENT/CPCI-721

1 - 3

Features 

The PENT/CPCI-721 familly is a variant of the PENT/CPCI-72x family 
group consisting of the PENT/CPCI-721 and the I/O-721. It is a Com-
pactPCI system slot board and can be expanded via an I/O board, the 
I/O-721. The PENT/CPCI-721 provides the base board functions neces-
sary to obtain an operational CPU board. The PENT/CPCI-721 has to be 
installed in the system slot of a CompactPCI system which is marked by 
a triangle. Its main features are described in the following subsection.

CPU

The PENT/CPCI-721 offers a mobile module based on a Pentium II pro-
cessor with 133, 166, 200, 233 MHz speed or higher with 512 KByte L2 
cache. Furthermore, the PENT/CPCI-721 features an 8254 compatible 3-
channel-timer.

Memory

Memory features include:

• 512 KByte flash BIOS, 8-bit wide

• Burst SRAM as L2 cache

• EDO DRAM (60 ns) with ECC support implemented on lower and 

upper memory modules

• Motorola 146818 compatible real time clock and CMOS RAM for 

storing factory settings, both RTC and RAM with battery backup

Содержание PENT/CPCI-721































































































































Отзывы: