Force Computers PENT/CPCI-721, Руководство по установке

Страница: 89 / 126

BIOS Boot Configuration
PENT/CPCI-721 4 - 7
Figure 30: Sample Setup Showing the Boot Configuration Options
In the example above BIOS attempts to boot in the following order:
1. Diskette Drive - from floppy disk
2. Removable Devices
3. Hard Drive - from hard disk
4. ATAPI CD-ROM Drive
Note:
• If you save changes you made in Setup, the selections in the
menus are stored in NVRAM (CMOS). The next time the system
board boots, BIOS configures the system according to the Setup
selections stored in NVRAM (CMOS). If those values cause the
system boot to fail, reboot and press <F2> to enter Setup. In Setup,
you can get the default values or try to change the selections that
caused the boot to fail.
• If you get the default values, note that the displayed default val-
ues are not yet stored to be effective for the next boot. They are
just loaded to be displayed. However, they are effective when the
current boot-up procedure is resumed.