Force Computers PENT/CPCI-721, Руководство по установке

Страница: 93 / 126

BIOS BIOS Messages
PENT/CPCI-721 4 - 11
Fixed Disk 0 Failure
Fixed Disk 1 Failure
Fixed Disk Controller
Failure
Fixed disk is not working
or not configured prop-
erly. Check to see if
fixed disk is
attached properly.
Run Setup to be
sure the fixed-disk
type is correctly
identified.
Fixed Disk 0...3 Identi-
fied
Autotyping identified
specified fixed disk. None
Incorrect Drive A type -
run SETUP
Incorrect Drive B type -
run SETUP
Type of floppy drive not
correctly identified in
Setup Check for correct
floppy drive in
setup.
Keyboard controller
error
The keyboard controller
failed test. Replace the key-
board.
Keyboard error
Keyboard not working Check for correct
keyboard connec-
tion.
Keyboard error nnn
BIOS discovered a stuck
key and displays the scan
code nn for the stuck key. Replace keyboard,
check for stuck
keys.
Operating system not
found
Operating system cannot
be located on either drive
A: or drive C:. Enter Setup and
see if fixed disk
and drive A: are
properly identi-
fied.
Parity Check 1 nnnn
Parity error found in the
system bus. BIOS attempts
to locate the address nnnn
and display it on the
screen. If it cannot locate
the address, it displays
????
.
Check for correct
memory module
types.
Parity Check 2 nnnn
Parity error found in the
system bus. BIOS attempts
to locate the address nnnn
and display it on the
screen. If it cannot locate
the address, it displays
????
.
Check for correct
memory module
types.
Message Explanation Corrective Action