Force Computers MODUSYS 2000 Kernel, Руководство пользователя

Страница: 18 / 114

ModuSys 2000 Kernel xvii
!
Safety Notes
The text in this chapter is a translation of the “Sicherheitshinweise” chapter.
This section provides safety precautions to follow when installing,
operating, and maintaining the ModuSys Kernel.
We intend to provide all necessary information to install and handle the
ModuSys Kernel in this manual. However, as the product is complex and its
usage manifold, we do not guarantee that the given information is
complete. If you need additional information, ask your Force Computers
representative.
The ModuSys Kernel has been designed to meet the standard industrial
safety requirements. It must not be used except in its specific area of
office telecommunication industry and industrial control.
Only personnel trained by Force Computers or persons qualified in
electronics or electrical engineering are authorized to install, maintain,
and operate the ModuSys kernel. The information given in this manual is
meant to complete the knowledge of a specialist and must not be taken as
replacement for qualified personnel.
EMC
The system is designed to comply with the limits for a Class B digital
device in this system, pursuant to part 15 of the FCC Rules respectively
EN 55022 Class B. These limits are designed to provide reasonable
protection against harmful interference when the system is operated in a
commercial, business or industrial environment.
The system generates and uses radio frequency energy and, if not
installed properly and used in accordance with this Preliminary System’s
Guide, may cause harmful interference to radio communications.
Operating the system in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the
interference at his own expense. Use of shielded cables when connecting
to the I/O interface ports is required to ensure compliance with EMC
regulations and standards.