for Living 088-1763-0, Руководство по сборке

Страница: 8 / 17

8
Product No. 088-1763-0
●
●
●
●
●
●
●
●
●
●
1. Installing the expanding bolts
Drill holes about 3 1/2” (8.9 cm) deep on each marked bracket location using the drill bit (G).
Insert the expanding bolts (A) into the lead sleeves (E).
Insert the expanding bolts (A) with the lead sleeves (E) inside the drilled holes. Use a hammer if necessary.
While inserting the bolt, make sure the bolt head faces the drilled hole.
2. Mounting the wall brackets
Align the holes of the wall brackets (1) with the protruding threads of the expanding bolts (A).
Mount the wall brackets (1) onto the expanding bolts (A).
Secure the wall brackets (1) in place using the flat washers (B), spring washers (C), and M12 nuts (D).
CAUTION!
Before drilling, ensure that there are no electrical wires or water pipes behind the drill spots.
Wear protective goggles, mask, and hearing protection while drilling the holes.
Install all wall brackets supplied with your awning for secure mounting.
B C
D
D
C B
A
A
E G A E
1
A
Installation