12
Product No. 088-1763-0
●
●
●
1. Turning the awning on
●
Insert the plug (15) into an electric outlet after installing the awning.
2a. Opening and closing the awning
Press the Open button on the remote control (3) once to open the awning.
Press the Close button on the remote control (3) once to close the awning.
Press the Pause button to stop the awning from opening or closing fully. To resume opening or closing
the awning press either the Open button once to continue opening or the Close button once to
continue closing.
WARNING!
To prevent the motor from overheating, do not continuously press the Open or
Close buttons after the awning is already fully extended or retracted.
120V
Pause
Close
Open
WARNING!
The plug on this awning is not waterproof. It must be plugged into an outlet that is indoors
or under a protective waterproof cover outdoors.
Firmly hold the plug when removing it from the outlet. Do not pull the cord in any way as
it could damage the plug, the awning and/or cause injury or death.
If the plug does not fit the outlet, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way. Do not cut off the cord and reconnect it with or
without the plug connected to the outlet. This is very dangerous.
WARNING:
To reduce the risk of electric shock,
this equipment has a grounding type plug that has
a third (grounding) pin. This plug will only fit into a
grounding type outlet. If the plug does not fit into
the outlet, please contact a qualified electrician to
install the proper outlet.
15
3
●
●
●
●
●
Operation
