14
Product No. 088-1763-0
●
●
●
●
●
●
●
Operation
3. Adjusting the front bar angle (12–45 degrees)
Loosen the locking nuts (14) on both ends of the awning.
Turn the jack bolt (13) clockwise or counter-clockwise to achieve the desired angle.
To level the front bar (10), use the built-in level (9) located in the middle of the bar for reference.
Fasten all locking nuts (14) when the desired angle is achieved.
Right
Left
CAUTION!
When the awning is fully opened, the left and right lateral arms stay bent. This is normal.
Do not continue to crank the awning once it is fully opened in an attempt to straighten
the arms.
Note:
Make sure the crank handle is parallel to the wall. If the handle is angled, the awning will
not open or close.
Always remove the crank wand from the crank loop and store it in a safe place when
not in use.
14
14
13
13
14
14
10
9
