●
●
●
●
●
●
●
●
●
●
●
16
Product No. 088-1763-0
Cleaning the awning frame
Use a clean cloth soaked in mild detergent and warm water to clean the frame. Do not use
abrasive cleansers, chemicals, bleach, or solvents.
Do not let water and other liquids enter the motor of the awning to avoid damaging the motor.
Wipe the frame with a dry, clean cloth.
Dry the frame thoroughly.
Cleaning the fabric
It is sufficient to just brush off the dirt on the fabric in most cases.
If necessary, wipe dirt off the fabric using a damp cloth soaked in mild soap.
Dry the fabric completely in the extended position before retracting it.
Maintenance
Long-term Storage
To maintain the best look of the awning frame, apply some quality car wax after cleaning.
It is recommended to retract the awning when not in use for an extended period of time.
●
●
●
●
●
●
●
1. Disassembling the awning
Close the awning and unplug from the power supply.
Unhook the crank wand if installed.
Wind and tie the power cord.
Unscrew the fastening bolts and remove the awning frame from the wall brackets.
2. Storing the awning
Store the awning in its original packaging.
Remove the battery from the remote control.
Store the awning in a dry, clean area.
WARNING!
Disconnect the plug from the power supply before doing any cleaning and
maintenance to avoid the risk of severe personal injuries or death.
CAUTION!
Always clean and dry the awning completely before retracting it after use.
Before assembling, adjusting, or cleaning the right and left arms of the awning,
strap both arms, or extend the awning fully until the internal springs are completely
free of tension.
Note:
It is recommended to store the awning for long-term storage during prolonged
rainy, windy, or snowy weather conditions (e.g., winter season).
Cleaning and Maintenance
