71
Appendix 2. MFR-PSA Installation/ Replacement
2-1. How to Install a New MFR-PSA
The following procedure shows how to install a new MFR-PSA.
1.
Unfasten to remove four fixing screws along the front panel and detach the front panel.
2.
Turn off the POWER2 power supply switch.
3.
Remove the screw.
4.
Confirm that the MFR-PSA is facing correct direction
and firmly insert the unit.
5.
Lay down the MFR-PSA handle.
6.
Re-install the screw detached in Step
3.
7.
Turn on the POWER2 power supply
switch.
8.
Verify that the AC and DC LEDs on the
MFR-PSA lights green.
9.
Re-install the front panel.
MFR-PSA installation is now complete.
(7)
(8)
(5)
Handle
(3)
(2)
MFR-PSA
installing
position