FOR-A MFR-GPI, Руководство по эксплуатации

Страница: 56 / 76

56
6-3-3. Channel Name Request Commands (7)
K? commands allow you to obtain Source and Destination names in ASCII and/or in Kanji set
in the MFR Web-based Control menu.

Command Format
Command Command response
@[sp]K?<S or D><A or K>,<Offset> K:<SorD><AorK><No.>,<Dat>
Commands
BYTE No. 1 2 3 4 5 6 7 8-10 11
Command @ [sp] K ? S A , 000-3FF CR
D K 000-1FF
Command response
BYTE No. 1 2 3 4 5 6 7-9 10 11-
Response CR LF K : S A 000-3FF , CR LF
D K 000-1FF
Command
Response
BYTE 5
<S or D>
Select between S (Source) or D (Destination)
S: Source, D: Destination
BYTE 6
<A or K>
Select A (Ascii) or K (Kanji) for names.
Command BYTE8-10
<Offset>
Specify the start number of channels.
Source: 000-3FF, Destination: 000-1FF
Response BYTE7-9
<No.>
Indicates the channel number.
Source: 000-3FF, Destination: 000-1FF
Response BYTE11-
<Dat>
Indicates the short or long channel name using hex characters
(max. 128 bytes).
Character code for Ascii names:
Ascii
Character code for Kanji names: UTF-8
Command
Response
CR Carriage return
LF Line feed
Up to 32 channel names can be obtained per request.
Note that if the number of request channels exceeds the system maximum size, no data will return for
the exceeded channels.
► See the [Web-based Control:
SystemSize/LevelName page].