FOR-A FA-10DCCRU, Руководство по эксплуатации

Страница: 63 / 300

47
5-7. VIDEO INPUT SELECT (IN SEL)
Allows you to select input video signals, and select the operation for when signal input is lost.
5-7-1. VIDEO INPUT SET
V I D E O I N P U T S E T 4 7
I N S E L : S D I 1
L O S S : B A C K C O L O R
B A C K C O L O R : O F F
C H A N G E O V E R : D I S A B L E
Parameter Default Setting range Description
IN SEL SDI1
SDI1
SDI2
COMPOSITE
YPbPr SMPTE
*1
YPbPr BETACAM
*1
RGB
*1
Y/C
*1
Selects an input signal.
LOSS
BACK
COLOR
BACK COLOR
AUTO FREEZE
*2
COLOR BAR
OUT DISABLE
Selects an operation for the time
the signal input selected under IN
SEL is lost.
BACK COLOR BLACK
OFF
BLACK
BLUE
RED
MAGENTA
GREEN
CYAN
YELLOW
Select a background color.
CHANGEOVER
*3
DISABLE
DISABLE
ENABLE
Enables or disables
CHANGEOVER. Changeover
can be enabled only if IN SEL is
set to SDI 1.
*1 Selectable only if the FA-95AIO option is installed.
*2 The selected AUTO FREEZE functions the same as BACK COLOR if SYNCHRO in
section 5-10-1 “FS MODE SET” is set to LINE, AVDL, or INPUT. In such case, the menu is
indicated as “
＊ AUTO FREEZE”.
*3 This parameter is displayed only if FA-95CO software option is installed.
CHANGEOVER is always set to DISABLE at power-on.
 LOSS Operation
If the signal input that is selected under IN SEL is lost, the FA-9500 operates in the selected
LOSS mode as follows.
 In BACK COLOR mode
Outputs a matte signal of the color selected under BACK COLOR.
 In AUTO FREEZE mode
Freezes the last image before signal input is lost.
Freezes the field.
Freezes the frame if the lost input signal is of a progressive scan video format such as
720p.
 In COLOR BAR mode
Outputs the SMPTE color bar.
 In OUT DISABLE mode
Does not output any signal from SDI OUT1, 2, 3, 4, COMPOSITE OUT1 or 2.
 In AUTO FREEZE mode
Outputs a black screen if SYNCHRO is set to LINE, AVDL or INPUT under FS MODE SET
(section 5-10-1).
Menu button
IN SEL
DOWNMIX