FOR-A FA-10DCCRU, Руководство по эксплуатации

Страница: 171 / 300

155
 Aspect Ratio
Parameter Default Setting range Description
Aspect Ratio
AFD(4:3)
AFD(4:3)
AFD-ALT(4:3)
AFD(16:9)
AFD-ALT(16:9)
4:3 L 16:9 T
4:3 L 14:9 T
4:3 L>16:9
4:3 F 4:3
4:3 L 16:9PRTD
4:3 L 14:9
4:3 F ALT14:9
4:3 L ALT14:9
*1
4:3 L ALT 4:3
*1
16:9 L>16:9
16:9 F 16:9
*1
16:9 P 4:3
16:9 F PRTD
*1
16:9 P 14:9
*1
16:9 P ALT 14:9
*1
16:9 F ALT14:9
*1
16:9 F ALT4:3
*1
Selects the aspect ratio for the output from
Converter2.
Selectable aspect ratio settings when
Converter 2 is set to SD.
AFD(4:3), AFD-ALT(4:3), AFD(16:9),
AFD-ALT(16:9) automatically select an
aspect ratio according to the AFD data in the
input signal. If no AFD data is found in the
input signal, the aspect ratio will be
determined according to the setting made
under 5-10-18 ANC LOSS SET .
To output video signals in 4:3, select either
ratio with (4:3). To output in 16:9, select
either ratio with (16:9). Other options will
output video signals in the specified aspect
ratio. See section 20 “About AFD” for details.
Options (4:3 L 16:9 T to 16:9 F ALT 4:3)
other than the above four require the input
signal aspect ratio to be specified in SD
INPUT ASPECT (5-7-2) if the input signal is
an SD signal.
AFD
AFD
AFD-ALT
16:9 L>16:9
16:9 F 16:9
16:9 P 4:3
16:9 F PRTD
16:9 P 14:9
16:9 P ALT14:9
16:9 F ALT14:9
16:9 F ALT4:3
Selectable aspect ratios when Converter 2 is
set to 1080i, 720p, 1080PsF, or 1080(3G).
AFD and AFD-ALT automatically select an
aspect ratio according to the AFD data in the
input signal. If no AFD data is found in the
input signal, the aspect ratio will be
determined according to the setting made
under ANC LOSS SET (Sec. 5-10-18).
Options other than the above two output in
the specific aspect ratio. See section 20
“About AFD” for details on conversions
according to AFD data.
The Aspect Ratio setting cannot be changed if Converter2 Process Mode is set to BY-PASS.
*1 BT1119 WSS will be embedded according to the WSS AFD ERROR settings (Sec.
5-10-19) for the non-WSS aspect ratio conversions.
 Motion Sense
Parameter Default
Setting range
(Steps)
Description
Motion Sense
*1
Adaptive
Field
Adaptive
Frame(Odd
1st)
Frame(Even
1st)
Field: Generates a progressive scan image from
one field of an interlaced scan image.
The created image has no motion artifacts, but
vertical resolution will be reduced.
Adaptive:
Detects whether there is motion or no motion in
the scene, and generate an optimal progressive
scan image.
Frame(Odd 1st):
Generates a progressive scan image from two
fields (odd/even) of and interlaced scan image.
Suitable for the progressive segment frame input
of progressive scan signals.
Frame(Even 1st):
Generates a progressive scan image from two
fields (even/odd) of interlaced scan image.
IMPORTANT
*1 The Motion Sense setting is common for Converters 1 and 2. Setting Motion Sense
to Frame (Odd 1st) or Frame (Even 1st) for input signals other than progressive
segment frame inputs causes motion artifacts to appear. In such case, change the
Motion Sense setting to Field or Adaptive.