FOR-A FA-10DCCRU, Руководство по эксплуатации

Страница: 167 / 300

151

Aspect Ratio
Parameter Default
Setting range
(Steps)
Description
Aspect
Ratio
AFD(4:3)
AFD(4:3)
AFD-ALT(4:3)
AFD(16:9)
AFD-ALT(16:9)
4:3 L 16:9 T
4:3 L 14:9 T
4:3 L>16:9
4:3 F 4:3
4:3 L 16:9PRTD
4:3 L 14:9
4:3 F ALT14:9
4:3 L ALT14:9 *1
4:3 L ALT 4:3 *1
16:9 L>16:9
16:9 F 16:9 *1
16:9 P 4:3
16:9 F PRTD *1
16:9 P 14:9 *1
16:9 P ALT 14:9 *1
16:9 F ALT14:9*1
16:9 F ALT4:3 *1
Selects the aspect ratio for the output from
Converter1.
Selectable aspect ratio settings when CONV1 is
set to SD.
AFD(4:3), AFD-ALT(4:3), AFD(16:9),
AFD-ALT(16:9) automatically select an aspect
ratio according to the AFD data in the input
signal. If no AFD data is found in the input
signal, the aspect ratio will be determined
according to the setting made under 5-10-18
ANC LOSS SET .
To output video signals in 4:3, select either ratio
with (4:3). To output in 16:9, select either ratio
with (16:9). Other options will output video
signals in the specified aspect ratio. See section
20 “About AFD” for details.
Options (4:3 L 16:9 T to 16:9 F ALT 4:3) other
than the above four require the input signal
aspect ratio to be specified in 5-7-2 SD INPUT
ASPECT if the input signal is an SD signal.
AFD
AFD
AFD-ALT
16:9 L>16:9
16:9 F 16:9
16:9 P 4:3
16:9 F PRTD
16:9 P 14:9
16:9 P ALT14:9
16:9 F ALT14:9
16:9 F ALT4:3
Selectable aspect ratios when CONV1 is set to
1080i, 720p, 1080PsF, or 1080(3G).
AFD and AFD-ALT automatically select an
aspect ratio according to the AFD data in the
input signal. If no AFD data is found in the input
signal, the aspect ratio will be determined
according to the setting made under 5-10-18
ANC LOSS SET .
Options other than the above two output in the
specific aspect ratio. See section 20 “About
AFD” for details on conversions according to
AFD data.
The Aspect Ratio setting cannot be changed if Converter1 Process Mode is set to BY-PASS.
*1 BT1119 WSS will be embedded according to the WSS AFD ERROR settings (Sec.
5-10-19) for non-WSS aspect ratio conversions.
 Motion Sense
Parameter Default
Setting range
(Steps)
Description
Motion Sense Adaptive
Field
Adaptive
Frame(Odd 1st)
Frame(Even 1st)
Field : Generates a progressive scan image
from one field of an interlaced scan image.
The created image has no motion artifacts, but
vertical resolution will be reduced.
Adaptive : Detects whether there is motion or
no motion in the scene, and generates an
optimal progressive scan image.
Frame(Odd 1st) : Generates a progressive
scan image from two fields (odd/even) of an
interlaced scan image.
Suitable for the progressive segment frame
input of progressive scan signals.
Frame(Even 1st) : Generates a progressive
scan image from two fields (even/odd) of and
interlaced scan image.
IMPORTANT
The Motion Sense setting is common for Converters 1 and 2.
Setting Motion Sense to Frame (Odd 1st) or Frame (Even 1st) for input signals other
than progressive segment frame inputs cause motion artifacts. In such case, change
Motion Sense setting to Field or Adaptive.