background image

This  INSTRUCTION  MANUAL, 
which  is  an  integral  and  indispen-
sable  part  of  the  product,  must  be 
delivered to the user by the installer 
and must be kept in a safe place for 
future  reference.  The  manual  must 
accompany  the  boiler  should  it  be 
sold or its possession transferred. 

The  boiler  must  be  used  for  the 
purposes  for  which  it  has  been 
intended. Any other use shall be 
considered  incorrect  and  there-
fore dangerous. 

The boiler must be installed in com-
pliance  with  applicable  laws  and 
standards  and  according  to  the 
manufacturer’s instructions given in 
this  manual.  Incorrect  installation 
may cause injury to persons and/or 
animals  and  damage  to  property. 
The manufacturer shall not be held 
liable  for  any  such  injury  and/or 
damage. 

Damage  and/or  injury  caused  by 
incorrect  installation  or  use  and/or 
damage  and/or  injury  due  to  non-
observance  of  the  manufacturer’s 
instructions  shall  relieve  the  manu-
facturer from any and all contractual 
and/or extra-contractual liability. 

Before  installing  the  boiler,  check 
the technical data to be compatible 
with the requirements for its opera-
tion in the system.

Check that the boiler is intact and it 
has not been damaged during tran-
sport  and  handling.  Do  not  install 
equipment  which  is  damaged  and/
or faulty.

Do not obstruct the air suction and/
or heat dissipation openings. 

Only manufacturer-approved acces-
sories  and  optional  kits  are  to  be 
installed.

Properly  dispose  of  the  packaging 
as all the materials can be recycled. 
The  packaging  must  therefore  be 
sent to specific waste management 
sites. 

Keep the packaging out of the reach 
of  children  as  by  its  nature  it  may 
represent a hazard.

In  the  event  of  failure  and/or  faulty 
functioning, switch off the boiler. Do 
not attempt to repair it and contact a 
qualified service technician. 

Manufacturer-approved  parts  must 
be used for all repairs to the boiler. 

Non-observance of the above requi-
rements  may  affect  the  safety  of 
the  boiler  and  endanger  people, 
animals and property.

The  manufacturer  recommends 
our  Customers  to  have  the  boiler 
serviced  by  an  Authorized  Service 
Centre. 

In  order  to  guarantee  efficient 
and  correct  functioning  of  the 
equipment it is legally binding to 
have  the  boiler  serviced  once  a 
year,  according  to  the  schedule 
specified  in  the  relevant  section 
of this manual.

In the event of long periods of inac-
tivity of the boiler, disconnect it from 
power mains and close the gas tap 
(Warning:  the  boiler  anti-frost  func-
tion is disabled).

Should  there  be  a  risk  of  freezing, 
add  antifreeze:  it  is  not  advisable 
to  empty  the  system  as  this  may 
result in damage; use specific anti-
freezing products suitable for multi-
metal heating systems.

IMPORTANT

Should gas smell be perceived pro-
ceed as follows:

-  do  not  turn  on  or  off  electri-
cal  switches  and  do  not  turn  on 
electrical appliances;
- do not ignite flames and do not 
smoke;
- close the main gas tap;
- open doors and windows;
- contact a Service Centre, a qua-
lified  installer  or  the  gas  supply 
company.

Never  use  a  flame  to  detect  gas 
leaks.

        WARNING

This  boiler  has  been  built  for  installation  in  the  country  indicated  on 
the technical data plate: installation in any other country may be sour-
ce of danger for people, animals and property.

2

General information for the installer, maintenance technicians and users

Содержание BALI B BTFSE 24





























Отзывы: