FONA CDRelite System User Guide
B1057003 Rev. 3
35
S
TEP
4
A.
Remove new cable from the
replacement kit.
B.
Align the new cable to Sensor as shown,
making sure that the Sensor keying
feature connects to the corresponding
key in the cable assembly.
C.
When properly aligned, the cable fits the
back of the Sensor evenly and the metal
area on the Sensor is completely
covered by the cable.
D.
Holding the cable to the Sensor, insert
one of the screws into its hole.
E.
Using the screwdriver, tighten the first
screw just until you feel some
resistance. Repeat this action for the
second screw.
F.
Returning to the first screw, fully
tighten it; then, fully tighten the second
screw
IMPORTANT! Make sure that both
screws are securely tightened before
continuing.
S
TEP
5
A.
Using tweezers, remove a gel disk from
its paper backing and place it over one
of the screws you just tightened. Make
sure that the gel material completely
covers the screw.
B.
Remove another gel disk and repeat this
action for the second screw.
