8 Operation
00981795R03 – FZR20/25 LB, PL
Fig. 9
3. Remove front left and right return louver screws to uncover access port
(Fig. 9).
4. Route probe wire down either side channel in cabinet.
5. Use permagum to seal around probe wire access hole.
6. Reinstall louver screws.
ACCESS PORT
SIDE CHANNEL
LOUVER SCREWS
Operation
Quick setup checklist
•
Set time/date
•
Change temperature display from factory default Celsius to Fahrenheit (if desired)
•
Set high/low temperature alarms
•
Select password access (if required)
•
Set up chart recorder (if equipped)
•
Verify solution is in bottle
DANGER
• Do not extend all of the drawers when fully loaded to
avoid the possibility of the freezer tipping forward
• Refrigeration module area contains mechanical, moving
parts. Keep hands and arms clear of this area at all
times. If access to this area is required, power to unit
must be disconnected first.
