Maintenance
Inspect your cover periodically. Do not use a suspect cover system.
Perform a visual check periodically, specially of the cover carriage mechanism.
The front cover should be slightly tilted towards the spa front as soon as the back cover comes to
full rest.
The position of the stopping element should be equal on both sides.
Care
Simply wipe off dust and moisture form surfaces using a soft cloth e.g. microfiber.
Keep sharp objects away from the carbon support coating.
Damaged or badly scratched coatings allow water to infiltrate the structure.
In freezing outside conditions the transparent coating can chip off upon
freezing of water underneath.
Avoid acid and caustic solutions on the carbon coating.
Flush the metal part of the smart key with fresh water after contact with highly chlorinated spa
water. The smart keys construction allows enclosed water to run off when docked or when laying
flat with the plastic facing downwards.
When the carriage mechanism inside the carbon supports is impaired by sand, wet snow or other
debris follow the steps below:
-
Close the spa cover.
-
Use ordinary water to wash out all loose particles.
-
Water and debris will run off.
-
Let the system dry before further utilization.
14
