Fohhn DLI-230, Руководство пользователя

Страница: 55 / 68

55
Signal link 2 x Phoenix 3-pin, 1 x Phoenix 3-pin Fohhn-Net
Mains connection 1 x WAGO 2-pin, grounding screwed
Fault message contact 1 x Phoenix 3-pin, 1 x Phoenix 3-pin link
Switching contact 1 x Phoenix 3-pin
Connections (internal) (DLI-230 DAN)
Signal inputs 2 x RJ-45 1000BASE-T Ethernet, Dante and Fohhn-Net
Signal link -
Mains connection 1 x WAGO 2-pin, grounding screwed
Fault message contact -
Switching contact -
Connections (internal) (DLI-230 OPT)
Signal inputs 2 x Duplex LC Optocore 2 Gbps, Optocore and Fohhn-Net
Signal link Optocore Ring
Mains connection tbc
Fault message contact -
Switching contact -
Displays (internal) (DLI-230 AES)
Power on/off (stand-by) green = on, red = stand-by, red flashing = fault, blue = sign
Network control receive/send remote control LED
Displays (internal) (DLI-230 ANA)
Power on/off (stand-by) green = on, red = stand-by, red flashing = fault, blue = sign
Network control receive/send remote control LED
Displays (internal) (DLI-230 DAN)
Power on/off (stand-by) -
Network control -
Displays (internal) (DLI-230 OPT)
Power on/off (stand-by) -
Network control -
CAAD Simulation data
Simulation data EASE
[1] peak, 20 ms with band filtered pink noise in accordance with IEC 60268-2, one octave above the lowest cut-off frequency
[2] -10 dB under reflection-free half-space conditions
[3] horizontal x vertical at -6 dB
[4] net weight without optional extras
[5] further colours such as RAL Design or NCS only available on request