Fohhn DLI-230, Руководство пользователя

Страница: 33 / 68

33
3.3.4 FOHHN-NET Cabling and ID Allocation
For the control of multiple LINEA FOCUS loudspeaker systems, each system in the FOHHN-NET must
be allocated its own specific ID. Using this ID, each individual LINEA FOCUS system can be clearly
identified and controlled from within FOHHN AUDIO SOFT.
All loudspeakers systems have a factory setting of ID 1.
Duplicated IDs lead to ID conflict. In such a situation, it will no longer be possible to control
the systems concerned.
ID allocation for individual systems:
In order for an ID to be allocated, each LINEA FOCUS loudspeaker system must first be connected to
FOHHN AUDIO SOFT .
Proceed as follows:
1. Connect the LINEA FOCUS system to the mains power.
2. Depending on the product variant, connect an appropriate adapter or converter to the
computer.
With the
DLI-130/230 AES , DLI-130/230 ANA , LFI-350 or LFI-450, you can use an NA-3 or NA-
11 FOHHN-NET adapter. The DLI-130/230 DAN requires an Ethernet Switch.
3. Link the adapter or Ethernet Switch to the loudspeaker system using the appropriate CAT-
i.e. fibre-optic cable.
4. Start FOHHN AUDIO SOFT . The selected FOHHN-NET adapter will automatically be
recognised.
With the
DLI-130/230 DAN, the Dante Input Interface will be directly recognised. As a
FOHHN-NET Node, the IP Address of the Dante Input Interfaces will be displayed. This will
automatically be found, but it can also be manually configured.
5. When FOHHN AUDIO SOFT opens, an automatic search starts that results in the listing of all
correctly connected LINEA FOCUS systems.
If a system is not shown, check all the connections and re-run the search. When doing so, please also
note the ID search range.
Proceed as follows:
1. In the Devices menu, click on the Search Device/ Network Scan dialog.
2. If the system is not shown, check the mains power supply and/or the network cabling in your
system. Then repeat step 1.
If a LINEA FOCUS system is recognised, this appears with ID 1 (factory setting).
To change the ID directly in the Find Devices dialog, proceed as follows:
1. Click with the right mouse button on a loudspeaker system in the dialog’s list view.
2. In the context menu select Change Fohhn-Net ID .