Fohhn DLI-230, Руководство пользователя

Страница: 27 / 68

27
3. Closing the service flap and replacing the front grille
Close the service flap using the four (or two) large crosshead screws and their associated tooth lock
washers, which are vital for screw retention.
Closing the service flap on a DLI-130
Carefully place the grille in the groove at the base of the loudspeaker then lay it along the enclosure.
Using both hands and equal pressure, press the grille carefully into its snap lock closure.
3.3 System Set-up
LINEA FOCUS loudspeaker systems have no on/off switches, however, connection to the mains
supply via the power cable makes them ready for immediate operation. To avoid any circuit overload
when switching on, the systems are equipped with a switch-on delay (or Soft Start function).
Only connect the LINEA FOCUS systems to the main power supply AFTER all other system
components (mixing desk, playback devices, etc.) have been switched on.
Switch off in reverse order, disconnecting the systems from the mains power BEFORE
switching off all the other components! Otherwise this could result in hearing damage due
to loud signals! Nobody should stand directly in front of the loudspeaker systems for any
length of time!