TView Pro AV
User's Manual Rev 2.01
18
3.2 Internal Adjustments
The following adjustments are internal adjustments. These control require the user to remove the TView Pro AV’s
cover and make the indicated adjustment with an adjustment tool.
3.2.1 Input Video Level VR5
This potentiometer adjusts the gain of the Input RGB Computer Video.
3.2.2 Output Video Level VR4
This potentiometer adjusts the gain of the Output Television RGB Video.
3.2.3 Input RGB Offset Level VR3
This control adjusts the Input Blanking level.
3.2.4 Output NTSC Pedestal VR2
This potentiometer adjusts the level of the NTSC Pedestal.
3.2.5 Sync on Y output Insertion JP6
This jumper determines whether composite sync is inserted on the Y output. Connect the 2 posts of this jumper
together to produce sync on the Y output. Sync is always available on the dedicated component sync output
connector. The factory default is Sync on Y selected (Jumper JP6 installed).
Figure 2:
Adjustments and Jumpers
JP9
VR5
VR4
VR1
VR2
C11
JP10
VR3
JP6
C6
