TView Pro AV
User's Manual Rev 2.01
16
3.1.13 Sharpness (Flicker Reduction Filter) (Toggle)
This control operates the Flicker Reduction Filter. Set Sharpness "Off" (also referred to as Flicker Off) to reduce the
amount of flicker in the output NTSC or PAL. Set “SHARPNESS ON" to maximize the vertical sharpness. (Use
maximum sharpness for displays that have already been prepared for Interlaced operation, i. e. photo-realistic image
oriented presentations or animations). Use "FLICKER OFF" to reduce the flicker of Text and GUI oriented applications
(such as the Windows Desktop).
3.1.14 Luminance Filter (Toggle) (Not available from IR remote mouse)
This control operates the Luminance Bandwidth Filter. Set “L FILTER ON” to reduce the effects of aliasing when using
the higher resolutions and vertical refresh rates (e. g. 1024 x 768 at 75Hz.). Set “L FILTER OFF “ to preserve the highest
possible luminance bandwidth.
3.1.15 Brightness Boost (Toggle) (Not available from IR remote mouse)
This control applies a Brightness Boost to the Television Output. Set “BRIGHT MAX” to raise the brightness of the
Television Output. Set “BRIGHT NORM” to set the Television Output to regulation brightness level.
3.1.16 Saturation Attenuation (Toggle) (Not available from IR remote mouse)
This control applies a Saturation Attenuation the Television Output. Set “COLOR MIN” to lower the saturation of the
Television Output. Set “COLOR NORM” to set the Television Output to regulation saturation level. This control is
useful in producing legal NTSC or PAL signals with highly saturated input program material.
3.1.17 Freeze Frame (Toggle)
This control freezes the output video of the TView Pro AV. Select “INPUT FROZEN” to freeze the picture. Select
“INPUT LIVE” to view live input.
3.1.18 YUV /RGB Selection mechanism (Toggle) (Not available from IR remote mouse)
This control selects the color space of the component output. Select “RGB OUTPUT” for RGB appearing on the
R-Y, Y and B-Y connectors respectively. Select “YUV OUTPUT” for BetaCam levels of R-Y, Y and B-Y
appearing on the R-Y, Y and B-Y connectors respectively.
3.1.19 Sync Selection (Multiple) (Not available from IR remote mouse)
This control determines how the TView Pro AV will interpret input synchronization signals from the Computer Graphics
device. Select “IN= VGA SYNC” for VGA input and other devices that provide 5 wire video signals (i. e. Red, Green,
Blue, and H and V sync). Select “IN= MAC SYNC” for Macintosh input and other devices that provide 4 wire video
signals (i. e. Red, Green, Blue, and a composite sync). Select “IN= GRN SYNC” for Workstation input and other
devices that provide 3 wire video signals (i. e. Red, Green, Blue, with composite sync on Green).
