TView Pro AV
User's Manual Rev 2.01
14
3.1.4 Compression (Toggle) (Not available from IR remote mouse)
This control compresses the Television Output in the vertical direction. It is similar to the Underscan control,
except that it is operational in the vertical direction only.
3.1.5 UnderScan (Toggle)
This control selects whether Underscan is applied to the Television Output. An "UnderScanned" picture slightly shrinks
the whole display such that information in the corners is visible. Select “UNDERSCAN” when you have text or detail
oriented pictures that requires you to preserve fine detail in the corner regions of the display. An "OverScanned" picture
fills the entire area of the screen, which is the natural way of presenting material in television. Select “OVERSCAN” to
present photo-realistic and animation oriented material.
3.1.6 Terminate VGA (Toggle)
This control connects the TView Pro AV's 75 Ohm termination resistors onto the computer's RGB output lines. Select
“TERMINATED” unless you are using the TView Pro AV with a pass through monitor cable (such as a HyperCable-PC,
intended for use with the Pro AVCP product line).
3.1.7 Fine Genlock H Position (Range) (Not available from IR remote mouse)
This control adjusts the relative horizontal picture position of the Television Output with respect to a Reference Television
signal. This control is only operational when using the Genlock capability of the TView Pro AV.
3.1.8 Coarse Genlock H Position (Range) (Not available from IR remote mouse)
This control adjusts the relative horizontal picture position of the Television Output with respect to a Reference Television
signal. This control is only operational when using the Genlock capability of the TView Pro AV.
3.1.9 Genlock Subcarrier Phase (Range) (Not available from IR remote mouse)
This control adjusts the relative Subcarrier Phase of the Television Output with respect to a Reference Television
signal. This control provides slightly more than 180 degrees of variable phase control and most be used in conjunction
with the Genlock Subcarrier Phase Reverse Control to establish 360 degrees of phase control. This control is only
operational when using the Genlock capability of the TView Pro AV.
3.1.10 Genlock Subcarrier Phase Reverse (Toggle) (Not available from IR remote mouse)
This control selects 180 degrees of Television Output Subcarrier Phase shift with respect to a Reference Television signal.
This control is only operational when using the Genlock capability of the TView Pro AV.
3.1.11 Genlock Termination (Toggle) (Not available from IR remote mouse)
This control applies a 75 Ohm termination to the Genlock input. This control is always operational.
