Focus Gyrofocus, Инструкция по установке, обслуживанию и эксплуатации

Страница: 6 / 36

06
Handset One-Button Operation
(Default Setting)
·· Press button until two short beeps and
a blinking series of lines confirms the start
sequence has begun; release button.
·· Main gas flows once pilot ignition is
confirmed.
·· Handset automatically goes into Manual
Mode after main burner ignition.
Change from one-button to two-button ignition operation by pressing
and holding button for 10 sec. immediately after installing batteries.
ON is displayed and 1 is flashing. When change is complete 1 will
change to 2 .
NOTICE
Handset Two-Button Operation
·· Press and button simultaneously
until two short beeps and a blinking series
of lines confirms the start sequence has
begun; release buttons.
·· Main gas flows once pilot ignition is
confirmed.
·· Handset automatically goes into Manual
Mode after main burner ignition.
Change from two-button to one-button ignition operation by pressing
and holding button for 10 sec. immediately after installing batteries.
ON is displayed and 2 is flashing. When change is complete 2 will
change to 1 .
NOTICE
If the pilot does not stay lit after several tries, turn the main valve knob
to
OFF (p. 08).
WARNING
STANDBY MODE (PILOT FLAME)
Handset
·· Press and hold button to set appliance to pilot flame.
TO TURN OFF FIRE
Handset
·· Press button to turn OFF.
NOTE:
A new ignition is possible after the
OFF icon stops flashing.
FLAME HEIGHT ADJUSTMENT
Handset
·· To increase flame height press and hold
button.
·· To decrease flame height or to set appliance
to pilot flame, press and hold button.
G. DESIGNATED LOW FIRE AND HIGH FIRE
NOTE:
Backlight must be on for high fire and low fire double-click
operation.
·· To go to low fire, double-click button.
is displayed.
NOTE:
Flame goes to high fire first before
going to low fire.
·· To go to high fire, double-click button.
is displayed.
If the appliance will not operate, turn the main
valve knob to
OFF (p. 08).
WARNING
User instructions