Focus Gyrofocus, Инструкция по установке, обслуживанию и эксплуатации

Страница: 10 / 36

10
VENTILATION
This product is rated in excess of 7kW, and it is a legal requirement to
have 100cm² of ventilation if the input is in excess of 7kW. Thus 100cm²
of ventilation is required.
Any air supply shall be in accordance with national regulations.
If spillage is detected when commissioning the appliance then amongst
other problems there may be insufficient natural ventilation for the correct
operation of the flue. This is potentially a greater problem should the
property be of modern nature. If the appliance does not spill with windows
open but does with windows closed, this proves that lack of ventilation
is the problem, if not; it will be the flue at fault. Installation of an air brick
is the best solution. Any ventilation fitted must comply with BS 5871
part 3 and BS 5440 part 2. Ventilation located underneath or within the
immediate vicinity of the fire MUST NOT be used as it may adversely affect
the performance
of the O.D.S system.
Spillage detected during commissioning is almost always a result of poor
flue performance, which cannot be corrected by any amount of ventilation.
For Republic of Ireland ventilation may be required, see IS 813, ICP3, IS
327, and any other rules in force.
APPLIANCE SHUT-OFF VALVE
DISTANCE TO COMBUSTIBLES
Safety clearance distances from combustible materials.
INSTALLING THE APPLIANCE
Notes: Ensure that the gas supply is isolated before commencing
installation of the appliance.
Check that the thermocouple connection nut into the rear of
the valve is secure.
Smoke test the flue to ensure proper draw and that there are no leaks
present.
Locate the gas supply point. This appliance is suitable for all gas
connections, including those concealed behind
the opening.
Using 8mm or 12mm diameter pipe, connect the appliance to the gas
supply point. The appliance must be fitted with rigid or semi-rigid pipe of
8mm external diameter.
Keep the amount of 8mm pipe used in the supply to a minimum - less than
1.2m where possible. A long run of pipe may cause an unacceptable drop
in the supply pressure.
Installer information
≥ 300
≥ 300
≥ 300