Focus Gyrofocus, Инструкция по установке, обслуживанию и эксплуатации, Страница: 4 / 36

04
General Information
BATTERY TYPE
Receiver: 4x AA, R6 size.
Transmitter: 2 x AAA (Alkaline only).
FLUE SPILLAGE MONITORING SYSTEM
This fire is fitted with a flue spillage safety device. If the fire shuts down
during use for no apparent reason then several things may be suspected.
If a door or window has been opened creating a draught, then pilot
disturbance is the problem, and removal of the draught should resolve
this.
If the appliance is shut down by the Flue Monitoring System, the appliance
maybe re-lit after a period of at least 3 minutes. The appliance must be
fully turned to the “OFF” position first, and then re-lit as described in the
following pages.
If the monitoring system repeatedly operates and shuts down the
appliance, then the appliance should be turned OFF, not be used and a
qualified engineer should be called.
OPERATING INSTRUCTIONS
A. GENERAL NOTES
Wiring of valve and rceivr must be completed before starting ignition.
Failure to do so could damage the electronics.
Notice
Batteries - Handset
- Low battery indicator on handsets.
Batteries - Receiver
- Low battery indication: frequent beeps for 3 seconds when motor turns.
- An AC Mains adapter may be used instead of batteries.
- The module for fan speed control and light/dimmer includes mains power
together with batteries in the receiver for automatic backup in case of
power outage.
- Without using a mains adapter, battery replacement is recommended
at the beginning of each heating season.
- Old or dead batteries should be removed immediately. If left in the unit
the batteries can over, leak, and/or explode.
- Do NOT expose batteries (including during storage) to direct sunlight,
excessive heat, fire, moisture, or severe impact. Each of these
conditions can cause the batteries to overheat, leak, and /or explode.
- New and old batteries and different brands of batteries should not
be used together. Mixing of various batteries can cause the batteries
to overheat, leak, and/or explode.
Warning
Software Version
Press , and buttons simultaneously. Software version is displayed.
Handset Model Number
Press , and buttons simultaneously. Handset model number is displayed.
Deactivate Functions
1. Install batteries. All icons are displayed and flashing.
2. While the icons are flashing, press the relavant function button and hold
for 10 sec.
3. The function icon will flash until deactivation is complete. Deactivation
is complete when the function icon and two horizontal bars are displayed.
NOTE :
a deactivated button is pressed, there is no function, and two
horizontal bars are displayed.
NOTE :
Deactivation remains in effect after change of batteries.
The following Functions can be Deactivated/Activated
- CHILD PROOF
- PROGRAM MODE
- THERMOSTATIC MODE (ALSO DEACTIVATES PROGRAM MODE)
- ECO MODE
- LIGHT/DIMMER OPERATION
- CIRCULATING FAN OPERATION
- AUXILIARY FEATURE
- COUNTDOWN TIMER
iSetting the electronic code (First time use only)
Radio frequency Handset
A code is selected automatically for all Mertik Maxitrol electronics from
among 65.00 codes available. The receiver must be paired with the
handset.