background image

FS453/4 AND FS455/6 

 

DATA SHEET: HARDWARE REFERENCE 

3. Technical Highlights 

Creating clear, broadcast quality television video from high resolution computer graphics is a complex 
process.  PC-to-TV Video Scan Converters have to surmount many technical obstacles.  The most 
challenging of these are scaling, flicker reduction, and encoding.   

3.1 Scaling  

Converting high-resolution computer images into relatively low-resolution TV images (such as converting 
VGA or XGA images into NTSC standard definition television) is an inherently lossy process that requires 
a video scaler.  For example, converting an image with 1000 pixels in a line into an image with only 500 
pixels in a line, means that there must be 50% less data in each line of output.  The video scaler has to 
perform its tasks effectively without further degrading the image.  

3.1.1  Video Scaler Challenges 

Therefore, in addition to reducing pixel count and interpolating pixel values, the scaler must not alter the 
digital video data by adding artifacts.  Examples of artifacts are the introduction of repeated pixels; the 
complete loss of pixel data; and the creation of new pixel colors that are not interpolations of original pixel 
colors.  

In effect, the video scaler should behave like a high quality filter.  It should have a gradual frequency roll 
off with a good step response and little overshoot or ringing (less than 5%).  This is ideal for maintaining 
video quality with detailed images (such as text).  Detailed images produce rapid output step transitions 
that need to be executed cleanly. 

3.1.2 FS453 Solution 

The following diagram (Figure 2) illustrates the response of the FS453's video scaler.  It is a normalized 
plot of the Luma frequency response of the FS453's video scaler.  As we can see, the FS453's patented 
video scaler behaves like a high quality filter with only a gradual frequency roll off.   

   

0

0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

25

20

15

10

5

0

5

Scale 7/8
Scale 3/4
Scale 5/8
Scale 1/2

Normalized Frequency

Gain in Decibels

 

Figure 2: FS453 Scaler Luma Frequency Response 

 

JANUARY, 2005, VERSION 3.0 

COPYRIGHT 

©

2003-4 FOCUS ENHANCEMENTS, INC. 

FOCUS Enhancements Semiconductor  

 

Содержание FS453










































Отзывы: