Focus FS453, Техническое описание

Страница: 24 / 41

FS453/4 AND FS455/6 DATA SHEET: HARDWARE REFERENCE
7. Specifications
7.1 Absolute Maximum and Recommended Ratings
(Beyond which the device may be damaged)
(a)
Parameter Min Rec. Max Unit
Power Supply Voltages
V
DD-33
(Measured to VSS_33) -0.3 3.0-3.6 3.8 V
V
DD-18
(Measured to VSS_18) -0.3 1.62-1.95 2.4 V
V
DD-DAD
(Measured to VSS_DAD) -0.3 3.0-3.6 3.8 V
V
DD-PA
(Measured to VSS_PA)
-0.3 3.0-3.6 3.8 V
V
DD-DA
(Measured to VSS_DA) -0.3 3.0-3.6 3.8 V
V
DD-O
(Measured to VSS_O) -0.3 3.0-3.6 3.8 V
V
DD-OSC
(Measured to VSS_OSC) -0.3 3.0-3.6 3.8 V
V
SS-DA
, V
SS-DAD
, V
SS-PA
, V
SS-33
, V
SS-18
, V
SS-O
, V
SS-OSC
(delta) -0.3 0.3 V
Digital Inputs
3.3 V logic applied voltage (Measured to VSS_33 )
(b)
-0.3 0-V
DD-33
V
DD-33
+ 0.3 V
5V Tolerant (TTL) logic applied voltage -0.3 3.0-5.5 6.5 V
Forced current
(c,d)
-10.0 10.0 mA
Analog Outputs
Applied Voltage (Measured to VSS_DA )
(b)
-0.3 0-V
DD-DA
V
DD-DA
+ 0.3 V
Forced current
(c,d)
-10.0 10.0 mA
Digital Outputs
3.3 V logic applied voltage (Measured to VSS_33 )
(b)
-0.3 0-V
DD-33
V
DD-33
+ 0.3 V
5V Tolerant (TTL) logic applied voltage -0.3 3.0-3.6 3.8 V
Forced current
(c,d)
-6.0 6.0 mA
Short circuit duration (single output in HIGH state to
ground) 1 second
Temperature
Operating, Ambient 0 70 °C
Junction 125 °C
Case Temperature 95 °C
Lead Soldering (10 seconds) 300 °C
Vapor Phase Soldering (1 minute)
(a)
220 °C
Storage
(a)
-40 125 °C
Electrostatic
Electrostatic Discharge
(e)
±150 V
Notes:
(a) Functional operation under any of these conditions is NOT implied. Performance and reliability are guaranteed
only if operating within recommended ratings.
(b) Applied voltage must be current limited to specified range.
(c) Forcing voltage must be limited to specified range.
(d) Current is specified as conventional current flowing into the device.
(e) EIAJ test method.
Table 6: Absolute Maximum and Recommended Ratings
JANUARY, 2005, VERSION 3.0 24 COPYRIGHT
©
2003-4 FOCUS ENHANCEMENTS, INC.
FOCUS Enhancements Semiconductor