FNM HPEP 225, Руководство по установке

Страница: 12 / 123

12
Engine Bed
Distance between starboard and port engine mount is 23-1/2 in. (600 mm). Engine bed must
position engine so that a minimum of 1/4 in. (6 mm) up and down adjustment still exists on
mounts after performing final engine alignment. This is necessary to allow for realigning
engine in the future.
NOTE: Although the engine mounts allow some adjustment, it is a good practice to
ensure that the front and rear mount locations in the vessel are in parallel planes. This
may be checked by tying a string from the left front mount location to the right rear mount
location and another from right front to left rear. The strings should touch where they
cross.
ENGINE COMPARTMENT
ENGINE COMPARTMENT
WARNING
Boating standards (NMMA, ABYC, etc.) and Coast Guard regulations must be
adhered to when constructing the engine compartment.
Care must be exercised in the design and construction of the engine compartment. Seams must be located
so that any rain water that may leak through the seams is directed away from the air intake system.
CAUTION
Water that runs onto the air intake may enter the engine and cause serious damage to
internal engine and/or turbocharger parts.
IMPORTANT: C.M.D. srl will not honor any warranty claim for engine damage as a result of water
entry.