FMS-cradleGUARD Operating Manual and Installation Instructions
24.07.2019
10
FMS-cradleGUARD.R
Item Description
10 to 12
24 VDC (18 to 36 VDC) power supply, sustitutes batteries
Terminal 10: +12 VDC
Terminal 11: GND
Terminal 12: PE
not shown
Battery compartment
A
Dip switch for channel assignment (do not change!)
B
Dip switch for setting the ID (do not change!)
Table 3: Terminal Block for FMS-cradleGUARD.T Sensors
Do not change the Dip switches!
Changing the Dip switches will result in the loss of the radio
connection.
4.4.1
Connection of Sensors and Switches
Proximity switch
When proximity switches are used, the time delay before availability)
must be
≤
50 ms.
The power supply to the switch is 12 VDC. Switches with a typical
power supply (e.g. 10 to 30 VDC) can be used.
