FMS-cradleGUARD Operating Manual and Installation Instructions
24.07.2019
14
FMS-cradleGUARD.R
Item Description
4 Navigation
keys
Left – Scroll parameter list to the left
Right – Scroll parameter list to the right
Up – Increase parameter value
Down – Decrease parameter value
5 Enter
key
Select parameter, confirmation
6; 7
Menu key, status LED
By pressing and holding the menu key (> 3 seconds), you can enter the
configuration menu of the system parameters. The status LED lights up
until you exit the menu by pressing and holding the menu key again (> 3
seconds).
8
Cover with 4 fastening screws
9
PG gland for cable feed-through (24 VDC)
10
Lower fastening lug
Table 5: FMS-cradleGUARD.R
5.1
Configuration on the Device
Only a basic parameter can be set on the device. The configuration itself has to be done via
the web interface.
By pressing and holding the menu key (> 3 seconds), you can enter the menu of the system
parameters.
-
By pressing on the “left” and “right” keys, you can navigate through the parameter list.
-
By pressing the enter key, you select the system parameter to be changed.
-
Now, the name of the parameter to be changes is flashing
-
By pressing the “up” and “down” keys, the parameter value can be changed.
-
By pressing the enter key, you confirm your input and the changed value is saved.
-
Press and hold the menu key again (>3 seconds) to exit the menu. If nothing is entered on
the device, the menu is automatically exited after 60 seconds.
