Operating Instructions EMGZ492.PNET
05.10.2018
6
3
Product Description
3.1
Block Diagram
Figure 1: block diagramEMGZ492.PNET
3.2
System Description
The microprocessor-controlled measuring amplifier EMGZ492.PNET series is used in
processing, amplifying, and relaying sensor signals in suitable form to downstream
devices. The measured force values are available via PROFINET and an analog voltage
output.
The measuring amplifiers are suitable for tension measurements using all FMS load
cells. Two force sensors A and B can be connected to the device. Both measuring values
are available as individual signal (A and B), as sum signal (A + B), as differential signal
|
A – B
|
or as average value (A + B)/2 for the master controller.
Furthermore, device information, parameters, and system settings can be accessed via
a web browser. Offset compensation and system calibration can also be performed via
the web browser.
3.3
Scope of Delivery
The following is included in the scope of delivery
-
Measuring amplifier
-
Mounting and operating instructions
The following is not included in the scope of delivery
-
AC/DC power supply, minimum requirement: EMC immunity specifications
EN61000-4-2, 3, 4, 5; EN55024 light industry level, criteria A, e.g., TRAKO TXL 035-
0524D
-
Cable for power supply
The following is not included in the scope of delivery, but are available as accessories
from FMS
-
Patch cable with RJ45 plug (straight or 90
°
)
-
Sensor cable for the connection of load cell and measuring amplifier
-
M12 plug, D-coded
