Operating Manual CMGZ434
10
8
Installation and wiring
Caution
Proper function of the Tension Controller is only guaranteed with the recommended
application of the components. In case of other arrangement, heavy malfunction can be
the result. Therefore, the installation instructions on the following pages must be followed
strictly.
Caution
Local installation regulations are to preserve safety of electric equipment. They are not taken
into consideration by this operating manual. However, they have to be followed strictly.
Danger
The tension controller can operate drives with high performance. It has no built-in
emergency stop function. To provide safety of man and machine in case of malfunction,
the person responsible for system design has to establish specific safety procedures such
as emergency stop ciruits, etc.
8.1
Mounting and wiring of the electronic unit
Variant for insert card support block (CMGZ434)
The insert card support block can be mounted in a control cabinet. Wiring to the terminals
is done according to „8.5 Wiring diagram: Variant for insert card support block“ (fig. 6).
The electronic card then will be inserted into the insert block. It will be locked by a stop
hook (fig. 4).
Variant with separate housing (CMGZ434.E)
The housing can be mounted in a control cabinet or directly beside the machine. All
connections are led through glands to the screw terminals and connected according to
„8.6 Wiring diagram: Variant with separate housing“ (fig. 7 and 8).
