www.fmiproducts.com
126364-01A
24
TO TURN OFF GAS
TO APPLIANCE
1. Press OFF (bottom button) on the remote
control.
2. Close equipment shutoff valve (see Figure
21, page 16).
OPERATION
Continued
of the screen you will need to unlock the
screen by pressing ''unlock'' and ''OK''.
5. Press ''On'' and ''OK''. It may take up to 4
seconds before the control unit processes
the command. You will hear a beep from
the control unit and the pilot will start to
spark before lighting.
Note: You may be running this heater
for the first time after hooking up to gas
supply. If so, you may have to restart the
unit several times to allow the air to bleed
from the system.
CAUTION: Do not try to ad-
just heating levels by using the
equipment shutoff valve.
REMOTE CONTROL OPERATION
The remote control contains:
1. LCD display
2. Four buttons:
OFF button
Left button
Middle button
Right button
3. Battery Case (on the Back)
Batteries
(Back Side)
Left Button
Middle
Button
OFF Button
Right
Button
LCD Screen
Figure 49 - Remote Control
LCD DISPLAY
The LCD screen shows information about the
instructions given by the user (desired status)
and the current situation of the device (actual
status). It also helps us select our choices,
see Figure 50.
• A: Day of the week
•
B: Time
•
C: Signal Strength
• D: Selected working mode
•
E: Selected setting
•
F: Current Flame status
•
G: Current fan status
•
H: Current room temperature
•
I: Child lock status
• J: Button labels (explained below)
Figure 50 - LCD Display
