www.fmiproducts.com
126364-01A
21
INSTALLATION
Continued
8. Rest rear log in back corner sections of
chassis assembly as shown in Figure 41.
Figure 41 - Installing Rear Log
Rear Log
Figure 42 - Installing Left Top Log
Figure 43 - Installing Middle Crossover Log
Rear Log
Left Top Log
Left
Middle
Log
Middle
Crossover
Log
9. Place the left top log onto the rear log and
the left middle log. Make sure to place the
projection on the bottom of the left top log
into the recessed areas on the rear and left
middle logs (see Figure 42).
10. Rest the middle crossover log onto the right
middle log and the left front log (see Figure
43). Make sure to match the projection on
the bottom of the crossover log with the
recess area in the right middle log and the
left front log.
11. Place the top rear log onto the rear log as
shown. The rear log has a projection that
will fit into the recess area on the bottom
of the top rear log (see Figure 44).
Figure 44 - Installing Top Rear Log
Top Rear
Log
Rear Log
EMBER PLACEMENT
WARNING: Do not use
any other ember material not
supplied with this unit.
WARNING: Do not operate
unit without ember material
correctly in place as shown in
Figures 46 & 47. Do NOT place
ember material anywhere else
on the unit. Use only ember ma
-
terial supplied with unit. Exces
-
sive or incorrectly placed ember
material may produce carbon
monoxide or soot.
