www.fmiproducts.com
126364-01A
20
INSTALLATION
Continued
Figure 36 - Installing Left Ember Bed Log
Left Ember
Bed Log
3. Place left ember bed log as shown in
Figure 36. The log has groove on one side
that sets on the ember bed pan. The back
side of this log needs to rest against the
front of the base assembly. Make sure the
flame from the ember pan does not touch
the ember bed log.
4. The FSF32 and FSF36 use two different
right ember bed logs. The FSF32 right
ember bed log is installed in the same
manner as the log in step 3 above but on
the right side. The FSF36 right ember bed
log has a hole in the bottom that sets on the
grate finger and the other end rest on the
fireplace floor, place log as shown in Figure
37. The back side of this log needs to rest
against the front of the base assembly,
make sure the flame from the ember pan
does not touch the ember bed log.
Figure 38 - Installing Left Middle Log
Figure 37 - Installing Right Ember Bed Log
FSF36 Right
Ember Bed Log
Left Middle
Log
Hole
Underneath
Grate Prong
5. The left middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the left front log
as shown in Figure 38.
6. The right middle log has a groove on the
bottom to sit on the chassis and has to sit
on the tab on the back of the right front. The
right middle log should have a recess area
that fits around the ramp log as shown in
Figure 39.
7. The rear middle log should fit between the
ramp log and the rear burner. The left and
right middle logs have recessed areas for
the rear middle log to sit into (See Figure
40). Be careful not to push the rear burner
out of position while installing this log.
Rear
Middle Log
Figure 40 - Installing Rear Middle Log
Figure 39 - Installing Right Middle Log
Right Middle
Log
