background image

13

105271

OWNER’S MANUAL

 WARNING: After installation

and periodically thereafter, check
to ensure that no flame comes in
contact with any log. With the
heater set to High, check to see if
flame contact any log. If so, repo-
sition logs according to the log
installation instructions in this
manual. Flames contacting logs
will create soot.

It is very important to install the logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater.

1.

Place one-piece log set on grate to fit
as illustrated in Figure 22. Make sure
middle section at bottom of log set is
seated into "U"-shaped cutout in cen-
ter of chassis (see Figures 22 and 23).

IMPORTANT: 

Make sure log does not

cover any burner ports.

2.

Install fireplace screen by slipping
notches of fireplace screen over screws
on front of fireplace (see Figure 24).

 WARNING: You must operate

this fireplace with the fireplace
screen in place. Make sure fire-
place screen is in place before
running fireplace.

 WARNING: Failure to position

the parts in accordance with these
diagrams or failure to use only
parts specifically approved with
this heater may result in property
damage or personal injury.

INSTALLING LOGS

 CAUTION: Do not remove the

warning and instruction labels
attached to the heater base as-
sembly. These markings contain
important warranty information.

INSTALLATION

Continued

Figure 22 - Installing One Piece Log Set

One Piece Log Set

Burner
Ports

Figure 23 - Installing One Piece Log Set (Top View)

Notches

Figure 24 - Installing Fireplace Screen

Screws for
Mounting Screen

O

F
F

P

IL

OT

O

N

H

I

L

O

Chassis

"U"-shaped
Cutout in
Chassis

One Piece
Log Set

Burner

Middle
Section at
Bottom of
Log Set

Continued

Содержание FPVF33NR





























Отзывы: