FlySky Paladin PL18EV Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 45

FlySky Paladin PL18EV Скачать руководство пользователя страница 37

34

Turn on or off system sounds.

•

This function is enabled by default. If it is enabled the box will

have a check in it, to disable it touch it.

•

Use the + and – icons to change the volume.

10. System

The system menu content is mainly used to set various functions of the transmitter, such as screen

settings, sound settings, and so on.

10.1 Language

The system can display both [English] and [Chinese].

To change the system language go to language menu in the System
menu.

•

The system defaults to the official language of the target sales
area.

•

For actual languages, see the transmitter language list.

10.2 Units

Choose what units to use for length and temperature.
[Length] can select metric and imperial system. The default is metric.
[Temperature] can be selected in Celsius and Fahrenheit. The default is
Celsius.
The box highlighted in light green is the currently selected setting.

10.3 Sound

10.4 Vibration

This function enables or disables vibration for various actions.
Status or function that can be set for vibration: power on, Shut down,

Safety, Standby Timeout, Voltage alarm, Weak signal, RX connection,

RX disconnection, Timer count down, Timer over, sensors.
The settable states is are: No vibration, Weak vibration, Strong
vibration, the system default is off.

10.5 Backlight Timeout

Changes how long the screen takes to turn off when not in use. The

default is 30 seconds. Touch a time from the selection and press the

back icon to save and exit.

•

Leaving the screen on for longer will use more power and as

such may lead to reduced battery time.

«
...
35
36
37
38
39
...
»

Содержание Paladin PL18EV














































Отзывы:

Нет отзывов