22
7.15 Function assignment
This function allows you to reassign the functions, controls and trims of the
18 channels according to the current model structure or operation habits.
Function Settings:
1. Go to the function assignment interface;
2. [Function]: Select the function channel to be reassigned, and enter
submenu. Select the channel to be assigned with the function.
[Control]: Click [Control] corresponding to [Function]. Select the control
you want to assign. The selected controls are highlighted. Click return.
The control is successfully assigned;
[Trim]: Click the [Trim] box corresponding to the channel. Select the
button or knob you want to assign. The selected controls are highlighted.
Click return. The assignment is successful.
The system provides 18 optional channels. A channel cannot be assigned
repeatedly.
7.16 Display Servos
For all function settings that affect the channel output, the servo actions can be confirmed through graphs.
This function can be used to automatically detect the servos. When automatic detection of servos is enabled,
servos of all channel servos will oscillate slowly and repeatedly. Be cautious.
Test Mode:
1. Touch the
icon to activate test mode. When test mode is active all channels will slowly move through their
entire range of motion.
2. Touch the icon again to exit test mode.