18
7.9 Mixs
This function is used to set the linear mixes between channels. You can create 20 groups of mixing relationships.
Function Settings:
This function can be set in different states.
[Master] indicates the control role in the current mixing relationship;
[Slave] indicates the affected object in the current mixing relationship;
[Down side] indicates the mixing ratio of the low end of the mixing channel to the low end of the mixed channel. The
adjustment range is from -100% to 100%;
[Up side] indicates the mixing ratio of the high end of the mixing channel to the high end of the mixed channel. The
adjustment range is from -100% and 100%;
[Offset] indicates the offset of the mixed channel. The adjustment range is from -100% and 100%.
Note: Click
+ and – icons
to adjust the ratio in the corresponding interface.
Click to enter the setting interface.
Steps:
1. Select a group of linear mix, to enter the mix setting interface. Activate this function;
2. Select the mixing channel and the mixed channel respectively;
a. Select [Stick or knob] or [Output Channel] for the mixing channel;
In [Stick or knob], select four sticks or seven VRA-VRG knobs. Select this item as the mixing channel, indicating
this Stick or knob is used as the input end of the linear mix. Data is not affected by any other function of the
system;
In [Output Channel], you can select 1-18 channels. Select this as the mixing channel, indicating that the final
output of this channel will be used as the input end of linear mix.
b. Select [Output Channel] for the mixed channel;
In [Output channel], you can select 1-18 channels. Select this as the mixed channel, indicating that the mixed
object is the final output of this channel.
3. Select [Down side], [Up side] and [Offset] to enter submenu;
4. Click "+" and "-" on the screen to modify the mix ratio and offset ratio.
7.10 Track mixing
In the model structure, select the left and right track function. In the model
function menu, add the [Track mixing] function interface.
You can control the left and right tracks with one stick to move forward or
steer differently at the same time.
Function Settings:
Under this function, the left track can control the forward and backward of the
model, and the right track can control the left and right steering of the model.
1. The adjustment range of front, back, left and right is 0%-100%.
2. Click to select the corresponding adjustment box. The adjustment box is
highlighted. Click "+" "-" to modify the corresponding adjustment ratio.