21
[Sound prompt]
This function can be selected according to the needs of the voice prompt [Timers 1] or [Timers 2].
[Model timer] is used to calculate total working time of the model.
Function Settings:
1. Select [Model timer], enter the submenu, and select Enable switch to
activate this function;
2. [Reset]: Click to reset accumulated time.
7.13 Timers
This function allows you to set various timers, which are generally used to calculate the total model running time,
competition specific time spent or transmitter running time, etc.
[Timers 1/2]: indicates that the system has 2 sets of timers.
•
[Timers 1] and [Timers 2] have the same function. Only one timer setting
method is introduced below.
Function Settings:
1. Select [Multipurpose Timer 1/2].
2. Select the timer type.
3. If you select [down timer] or [down then up],you need to use the "+" "-" to
set the timer, the system defaults to 5 minutes; if you select [up timer], you
can omit this step.
4. Touch [Start] to start the timer.
Touch [Stop], to pause the timer.
Touch [Reset] to reset the timer.
Touch the
icon to assign a switch to control the timer.
Function settings:
This function can be used to adjust the curve of the throttle channel. It
can be set separately in different states. The system supports 10 types of
curves, that is, 5 types of "/" curves and 5 types of "V" curves respectively.
The adjustment range of each point is 0-100%.
The horizontal axis represents the input value of the throttle stick.
The vertical axis represents the output value of the throttle after
adjustment.
The red line is the linear relationship between the input value and the
output value.
The "L" icon below the coordinates indicates the first point on the curve.
The box highlighted in light green is the currently selected setting.
1. Touch the
icon to enter the curve selection.
Every time the curve type is changed the previous curve settings will be
lost. The system will ask for conformation before changing the curve
type.
2. Choose a curve type from the list. Once a curve is selected the system
will automatically return to the curve chart.
3. Touch a point to select it, then use the + and – icons to change the
points value. Repeat with other points as needed.
7.14 Throttle curve
This function changes the output curve for the throttle channel. A curve can be created using 3 – 11 different points
so that the user has much better control of the aircraft's engine.
A curve can also be set in the EXP function.