Nynja Operators Manual issue 2 (E) 1.2
41
9.9 Component Life
The following components have a calculated fatigue or wear life. They
should be replaced at the following intervals:
Lower Lift strut Bolts
500
Upper Lift strut bolts
1000
Leading and Trailing edge to fuselage
attachment bolts
1000
Wing fold spar attachment pins
500
Control stick pivot bolt
1000
Control stick torque tube forward hinge bolt
1000
All Control cables
2000
9.10 Fabric
9.10.1 The Nynja can be fitted with either Dacron or Xlam coverings. It
should be noted that Dacron degrades more rapidly than Xlam when
exposed to UV light, and therefore requires more care to ensure a
long service life.
9.10.2 Prolonged outside uncovered storage is not recommended.
9.10.3 Covering fabric and its stitching can be tested with the BMAA
approved ‘Bettsometer’. This should be done annually. In addition it
should also be done after each 100 hours of flight or after each 20
days of accumulated outside storage (such as resulting from touring
use) – whichever accumulates the sooner.
9.10.4 The minimum Bettsometer test values for the Nynja are:
Dacron
1000g
Xlam
1360g
All stitching
1360g
9.11 Damage to fabric
9.11.1 Small tears in the fabric up to 30mm long, or abraded holes up to
15mm diameter, that are more than 50mm from a seam line, or can
be repaired using a self adhesive patch, if possible to both sides of
Содержание Skyranger Nynja 912UL
