FLYGT MAS 711, Инструкция по установке и эксплуатации

Страница: 85 / 150

Settings with the Web Tool, Record Running Time and Number of Starts
• Set the alarm limits manually or automatically. To set up the limits automatically, tick
Automatic setup of alarm limits and graph settings at Update . This will set the
alarm limits according to the data plate information.
• Click Update.
•
Result: Recording of running time is enabled.
4. Power Analyzer
• Select Pump current (Power Analyzer) in the Input source drop-down menu.
• Set the alarm limits manually or automatically. To set up the limits automatically, tick
Automatic setup of alarm limits and graph settings at Update and click Update.
This will set the alarm limits according to the data plate information.
• Select and activate the other associated channels (Pump current, Current unbalance,
Voltage unbalance/System voltage, System power, System power factor) in their
respective Input source drop-down menu.
• Set the alarm limits for the other associated channels in the same way as pump
current and click Update.
• Result: Recording of running time is enabled.
5. Run input (pump on/off)
• Select Run input (MAS) in the Input source drop-down menu and click Update.
• Result: Recording of number of starts is enabled.
85