FLYGT MAS 711, Инструкция по установке и эксплуатации

Страница: 53 / 150

Installation, First Setup Using the Web Tool
Step Action Detailed
instruction in
chapter Settings
with the Web Tool
9 Use one of the following methods to enable recording of
pump running time and number of starts:
• Power analyzer
Click Setup — Pump current and activate/set
the associated channels (Pump current, Current
unbalance, Voltage unbalance/System voltage,
System power, System power factor).
• Current transformer
Click Setup — Pump current and select Pump
current input (MAS) as Input source.
• Run input (pump on/off)
Click Setup — Pump current and select Run input
(MAS) as Input source.
• No possibility to record
If there is no possibility to record starts and running
time in the system, continue with step 10.
Record Running
Time and Number
of Starts
10 If the pump is placed at a distance from the base unit
exceeding 30 meters,
• click Setup – applicable channel (channel using
Pt100 sensor)
• measure the resistance in the leads or calculate a
value and enter it as a compensation for long leads.
Compensate for
Measurement Error
due to Long Leads
11 If you want to start fresh with an empty database (no
logged data),
• click Reset min/max at the bottom of the Quick
overview or go through all channels individually and
click Reset min/max.
• click Setup — Data log, select All and click Clear.
• click (Setup —) Running statistics and click Reset
ALL .
• reset energy recordings directly on the Power
analyzer using the keypad. See Power Analyzer
PAN 311/312 manual.
Preserve, Upload
and Delete
Measurement
Data
(in chapter
Operation )
12 Click (Setup —) Pump Info — Data plate if you want to
enter additional data plate information in the Custom
text
fi
eld.
Handle Pump
Information and
Service Functions
Using the Web
Tool
(in chapter
Operation )
13 Click (Setup — Pump Info — ) Service log if you want to
make service notes in the Service log edit
fi
eld.
Handle Pump
Information and
Service Functions
Using the Web
Tool
(in chapter
Operation
)
53