FLYGT MAS 711, Инструкция по установке и эксплуатации

Страница: 40 / 150

Installation, Wiring, Midrange Pumps, SubCab 12–lead Sensor Cable, Alternative 2
Sensor/Component Sensor cable, no. 1) Base unit terminal
block, no.
• Supply, ground 11 36
• Supply, 12V + 12 35
(Screen)
If applicable, attach
screen to ground
terminals in the
• pump top and
• electrical cabinet.
NOTE!
1) If the sensor cable contains a green-yellow lead, that lead should not be connected.
2) VIS 10 is not applicable to pump type 3153.
3) Communication port 37-38 for RS-485 is common to both pump memory and
operator panel.
Terminal
Diagram
This is a wiring diagram of the sensor terminals (section 2) used for a SubCab 12-lead
sensor cable, 2 (vibration sensor, no leakage sensor in junction box):
19 18 17 16 15 14 13 12 11 10
9 8 7 6 5 4 3 2 1
VIS 10
+
Gnd
+ +
Gnd
Terminal
Description
This table describes the sensor terminals (section 2) used for a SubCab 12-lead sensor
cable, 2 (vibration sensor, no leakage sensor in junction box):
Terminal
Number Type Description
19 Not used
18 + Vibration or optional sensor input, 4-20 mA
17
+
Leakage in inspection chamber, FLS
16 Ground Leakage in inspection chamber/vibration, common ground
40