Safety Warnings
•
Due to the regenerative braking, the KISS ESC should only be powered by LiPo batteries.
A power supply might get damage when braking. The ESC takes care of itself.
•
Never start a brushless motor in your hands!
•
While starting up with propellers mounted, always do it in a distance of yourself & objects
•
The KISS ESC can be locally heated up to 80 ° C during operation!
•
While soldering do not connect a voltage source at the ESC / speed controller.
•
Some components on the KISS ESC can be destroyed by static charge. When handeling such
electronics, make sure to be grounded.
Description/Components
1.
Solder contacts for motor-phase connections
2.
LiPo Power supply GND -
3.
LiPo Power
4.
PWM/Dshot signal input (servo signal)
5.
PWM/Dshot signal GND (ground reference)
6.
Solder jumper to set the direction of rotation (also in 3D mode)
7.
Telemetry (e.g. On the KISS FC connected to TRX/TLM)
8.
Status LED (indicates validity of the input signal)
