Fly Wing H1-Heli Скачать руководство пользователя страница 3

H1 user manual

10.to control the helicopter manually by turning the transmitter 3D mode switch in case of Emergency .
11.Please note that the helicopter is still in the Auto GPS flight mode state at this time. If you need to completely
exit the flight mode, please turn the flight stop button on the transmitter.
12.Please keep control of the helicopter all the way. Do not rely on GPS to provide information. In specific flight
mode or flight environment, GPS system can not work normally, such as precise landing or active braking and
other functions will not be available. Please make a reasonable judgment on the flight condition by naked eye
observation, and set the corresponding flight and return altitude according to the flight environment.

Disclaimer:

The remote control model is not a toy. This product is only suitable to adults who have experience in correct model
helicopter assembly, setting, commissioning and operation. The helicopter should only be flown in legal remote
control flying field. This product is not suitable for children or those who do not have experience in remote control
model helicopters. For inexperience or a new beginner, the helicopter must be operated under the direct
supervision of someone with considerable skills or expertise. The remote control model product of this
specification belongs to the operator who has high operational skills. Improper or unfamiliar use of this product
may cause serious harm to yourself and others, or even death. If the product is disassembled , it can cause loss of
parts in various situations. If the product is defective due to improper use, it will not be possible for us to replace
with the new product or to accept return of the item ,under the warranty conditions. The dealer is unable to
correct the abnormal loss of parts and components, because of the end user improper installation and setting
methods, modification of the goods (including use of the non-original parts), other equipment that does not meet
the specifications, and poor operation. For any damage, accident or injury caused,. Buyers and Operators assume
full responsibility at the time of purchase. Those who can not operate any professional remote-controlled model
helicopters, they shall not operate this product. At the same time, the operator must operate in the legal remote
control model flying site, pay attention to the personal safety of himself and others and strictly abide by and
comply with national and local laws and regulations. The whole machine hood is a fragile product. Many glass
fiber parts are surface painting products. Due to shrinkage, temperature and transportation process, there may be
problem of blasting and cracking on these items. This is the nature of the product itself. We can not be responsible
for any serious problem after face-to-face courier signed direct delivery of the product to you, Please be aware of
terms and conditions before you buy this sophisticated high tech radio control helicopter!

Through reading of the entire user manual to familiarize with the product
functions before operation

If the product is not operated correctly, it may cause serious injury to yourself or others, or cause product
damage and property loss. This product is complex, it needs to be familiar with it for a period of time
before safe usage, and you need to have some basic knowledge before operation. If there is no strong
safety awareness, improper operation may lead to product damage and property loss, and even cause
serious injury to oneself or others. This product is not suitable for children. Do not use parts not provided
or recommended by our company. You must strictly follow the company's guidelines to install and use
thees products. This guidance document contains safety, operation and maintenance instructions. Be
sure to read all instructions and warnings in the user's manual carefully before assembling, setting up
and using. You have read and understood all the contents of this document before using it.

To avoid possible injury and loss, it is important to observe the following items:

1

. Users are not allowed to operate this product in any condition of poor physical or mental state such as drinking,

drug taking, drug anesthesia, dizziness and fatigue, nausea, etc.

2.

Except in special circumstances (such as the helicopter may hit a crowd), it is forbidden to turn off the engine

during the flight

3.

After landing, be sure to turn off the helicopter before turning off the remote control transmitter.

4.

It is forbidden to use this product to throw or launch any dangerous object to buildings, people or animals.

5.The user shall immediately stop using the helicopter with abnormal flight status in case of accident (such as collision

or overturning). The user shall not continue to use the helicopter until it is repaired by the company or its recommended
maintenance center.

Warning

Содержание H1-Heli


























Отзывы: